1、 Product Introduction:

The Sand and dust testing machine, also known as the sand and dust testing box, is mainly used for product sealing performance testing and reliability testing.

2、 Product features:

The inner liner material is made of stainless steel, and the outer shell is made of cold-rolled sheet electrostatically sprayed. Adopting imported intelligent temperature control instruments

Small programmable controllers with protective functions for each system.

Metal mesh nominal wire diameter: 50um

Nominal spacing between lines: 75um

Talc powder dosage: 2kg/m3~4kg/m3

Conduct dust tests on electrical, electronic, automotive, motorcycle, and other products, components, etc.

3、 Execution standards and testing methods:

GB4208-93 Dust Prevention Test Method

GB2423.37-89 Sand and dust test method

GJB150.12 Sand and Dust Test Method

GB10485 Dust proof test method

4、 Product specifications and models:

Model GC-SC-500 GC-SC-800 GC-SC-010 GC-SC-015 GC-SC-020

Studio capacity 500 800 1000 1500 2600

Technical characteristics: Metal mesh standard spacing of 50um

The standard spacing between lines is 75um

Talc powder dosage: 2Kg/m2~4Kg/m2

Powder spraying and dust reduction form

1. Free dust reduction type: using a centrifuge to blow sand and dust to 1/5 of the top height of the box to allow it to settle freely

2. Blowing sand and dust: Bottom air pressure sprays dust, with adjustable three levels of pressure

Studio size D 80 90 100 100 120

W 80 90 100 100 120

H 80 100 100 150 180

Advanced brushed stainless steel control system studio

Cold rolled shell plate rust prevention and spray treatment

Digital intelligent touch key input on the operation interface

Constant operation mode

Input PT-100 sensor

Accessory function timer function

Standard configuration includes dust drying device, vibrator, sample holder, and wide observation window (door)

Overload and melting protection of safety devices, grounding protection, etc

Use power supply AC380V or 220V ± 10%, 50HZ

Power 0.3 0.3 0.3 0.5 0.5